Orion SkyQuest XX12g, Instruction Manual

Page: 5 / 40

5
Box #2: Dobsonian Base (Figure 3)
Qty. Description
1
Left side panel (with altitude motor and encoders pre-
installed)
1 Right side panel
1 Front panel
2 Side braces
1 Baseplate assembly (with azimuth motor and encoders
pre-installed)
6 Base assembly wood screws (coarse thread,
47mm long)
12 Base connecting bolts with hand knobs
12 Rubber retaining washers
12 Spacers for connecting bolts (10mm long, 15mm dia.)
1 Insertion tube for rubber retaining washers (~3” long)
2 Carrying handles
4 Handle mounting bolts (socket head cap screws)
3 Hex keys (2mm, 4mm, 6mm)
3 Plastic feet (XX12g only; feet are pre-installed on
XX14g)
3 Feet wood screws (1” long; XX12g only)
1 SynScan AZ hand controller
1 Hand controller cable (coiled)
1 Azimuth motor connection cable
1 RS-232 computer cable
1 DC power cable
Figure 3.
Contents of the base box.
a)
The larger components.
b)
The hand controller, cables, and other hardware.
a.
b.
Right
side
panel
Baseplate
assembly
Front
panel
Side braces
Left
side
panel
Azimuth motor
connection cable
Mounting bolts
for handles
Coil cable for
hand controller
Base connecting
bolts (x12)
Rubber retaining
washers
Base
assembly
wood
screws (x6)
Feet (x3) and mounting
screws (Feet come
pre-installed on XX14g)
Spacers for
connecting
bolts (x12)
DC power cable
Insertion tube
Phillips
screwdriver
Handles
Hex keys
RS-232
cable Hand
controller