Orion Sentry HP Quick Start Manual Download Page 11

Page: 11 / 12

Bulletin #: V113018-04

Issue Date: November 30, 2018

Orion Packaging Systems * A division of Pro Mach

4750 County Road 13 NE Alexandria, MN 56308

(800) 333-6556

http://www.orionpackaging.com/parts-and-service/manuals/

Page 11 of 12

Sentry HP/LP

Quick Start Guide

View All Recipes



On the Recipes Screen, press View all Recipes.



This screen is used to view the parameters you’ve set up for each recipe.



You may press Next and Previous to scroll through each recipe to view their parameters.



On this screen, you can edit the name of each recipe. To edit the name of the recipe, press the

“Recipe #” box at the top of the page. A keypad appears to rename the recipe to rename to something
more intuitive. For example, you may want to rename the loads from the previous page “Fragile” and
the other “Sturdy.”

Illustration 11 – Recipes Screen

Summary of Contents for Sentry HP













Search results

Summary of Contents for Sentry HP

Reviews:

Related manuals for Sentry HP

Brands by name

Popular brands

Orion Sentry HP, Quick Start Manual

Search results

Summary of Contents for Sentry HP

Reviews:

Related manuals for Sentry HP

Brands by name

Popular brands