background image

 

Installation and User’s Guide

http://www.orionimages.com 

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310 

pg4 

Cautions

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
         
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Install this monitor some distance 
From the wall and do not install unless 
Proper ventilation is provided. 

Place this product on a stable place. 
If not, it may fall, causing serious 
Damages to the monitor and people.

 

The openings must not be blocked by 
curtain, rug or other similar surface. 

When carrying this monitor, be careful 
not to damage the panel and drop it 
It may cause some trouble. 

Before carrying the monitor, tum it off 
and Unplug the signal cables and the 
power code From the wall outlet. 

Take the power plug out from the wall 
outlet. Do not pull the cable. It may 
snap the inner wires and cause 
overheating and fire. 

Install this monitor about 50cm far from 
the eyes and an angle of 0~15 degrees 
below eyes. Too close installation may 
cause having weak sight. 

Do not press the LCD panel with hands 
or the sharpened material hardly. 

For cleaning, unplug the monitor from 
the Wall outlet. Do net use the liquid 
cloth. Use the soft cloth. 

Do not use the chemical liquid for 
cleaning. It may cause fading and 
breakage. 

Summary of Contents for PREMIUM SERIES


















Reviews: