5
z
Fill the container with tap water to ‘Max Water Level’ indicated on the front of the container. This is about 1.5
liters. Please ensure the container is not overfilled. (Fig.3)
z
Place the water container back to the body. And put back the filter assembly into the water container. (please
make sure that the curved tube towards to the front of the water container). Close and lock the cover. The
locking mechanism will “Click” when locked.
z
Insert the flexible hose into the hose socket. (Fig.4)
z
Connect the telescopic tube to the flexible hose, and then connecting with accessories such as floor brush,
water brush, etc. Now it is ready for use.
2.
Power On
z
Extract the AC power cord fully by holding the cord and pull it towards you. Do not pull the cord by holding
the plug. as this will damage the cord.
z
Connect the plug to a suitable mains power outlet with the correct voltage.
z
Press firmly and turn on the main ON/OFF switch. One green indicator light will flash. The machine is now on
‘Standby’
mode. At this stage, your machine is ready to work.
z
Push the standby button on the main body will activate the machine in the lower suction mode.
Use of your product
1.
Power control on body:
---Standby Button
z
This button is used to switch between standby mode and operation mode. The initial push turns the suction
power on at the low mode. While the machine is operating, push this button returns the machine to the standby
mode.
---Suction Power Selection Button
z
There are four suction power setting, Low, Medium, High and Turbo. Use (+) or (-) button on the main body of
the machine to select the desired setting. (Fig.7)
z
The suction power class is indicated by the numbers of green indicating lights. For example: three green lights
means the suction power is now at the 3
rd
high position.(total 4 positions.)
Caution:
Before connect the plug to the power socket,
unwind a sufficient length of cable. A yellow mark on the
power cable shows the ideal cable length. Don’t expend the
cable beyond the red mark.
Caution:
Make sure the AC power cord is fully
extracted. During the operation a partially extracted
power cord will generate excessive heat.
