New Multi Function Controller
26
| ORION CO., LTD.
Infinitely Expandable
ORION CO., LTD. |
27
Baud-Rate Configuration
05-9.
New MFC can be used as a communicational distributor for any devices with its various
1)
communicational speeds.
To configure the baud-rate, adjust the baud-rate switch(SW6), which is circled at the
2)
lower right corner of the following picture.
* SW6 is used for BIC on/off (Pin No.1) and baud-rated configuration (Pin No.3~5) commonly.
Baud-Rate Configuration
3)
Mode
Switch (SW6) - 3,4,5
3pin
4pin
5pin
Daisy-chain In
9600bps
On
On
-
19200bps
Off
On
-
57600bps
On
Off
-
115200bps
Off
Off
-
Daisy-chain Out
9600bps
-
-
On
115200bps
-
-
Off
Before calling for service, check the following and then contact the dealership
where you purchased this product.
1. New MFC is not turned off even after MPDP power cable is
disconnected.
- New MFC and MPDP set work with the independent power supplies.
When you need to turn on the MPDP again, please connect power cable and press
"ON" button in the New MFC.
- If you want to turn off New MFC, please disconnect the power cable of the New MFC.
2. New MFC does not work with no reason.
- Please disconnect and reconnect the adapter.
- Please replace batteries of the remote controller.
Before calling for service
06.