Before epilating, thoroughly clean the respective area to remove residue (like deodorant). Then
carefully dab dry with a towel. When epilating the underarm, keep your arm raised up so that the
skin is stretched and guide the appliance in different directions.
As skin may be more sensitive directly after epilation avoid using irritating substances such as
deodorants with alcohol.
С
leaning the epilation head
After epilating, unplug the appliance and clean the epilation head. If you have used one of the
attachment 1a or 1b, first remove the clip and clean it with the brush.
To clean the tweezers element, use the cleaning brush dipped into alcohol. Clean the tweezers
with the brush from the rear side of the epilation head while turning the barrel manually. After
cleaning, place your preferred clip back on the epilation head.
HOW TO USE THE SHAVER HEAD
1.
Put on the shaver head by clicking it in (the long hair trimmer should be in front).
2.
When using the shaver head, always slide the switch up to the < second > setting.
3.
For best results, guide the shaving system in away that about half of the shaving foil and the
long hair trimmer are in contact with your skin. Always guide the appliance in the direction
of the trimmer. The trimmer first raises all long hairs and cuts them off. Then the flexible foil
follows to smooth away any stubble.
Cleaning the shaver head
1. After shaving, unplug the appliance and, if necessary, remove the OptiTrim attachment.
2. Clean the OptiTrim attachment with the brush.
3. In order to clean the shaver head, remove the shaving foil frame. To do so, press the release
bars on the front and back and pull it off.
4. Carefully tap the shaving foil frame on a flat surface.
5. Brush out the cutter block as well as the area below the cutter block.
6. N.B: The shaving foil is a very delicate part that must not be cleaned with the brush.
7. We recommend that you put a drop of light machine oil along the length of the trimmer every
3 months.
8. Put the shaving foil frame back on and snap it into place.
9. Replace the OptiTrim attachment because it also serves as a protective cap.
Note: Do not use the shaver head with a damaged shaving foil.
Replacing the shaving parts
The shaving foil and the cutter block are precision parts that wear out with the time. Have the
shaving foil frame and the cutter block replaced when you notice a reduced shaving performance
even after cleaning the shaver head.
This product conforms to the European Directives EMC 89/336/ EEC and Low Voltage
73/23/EEC.
At the end of the product's useful life, please dispose of it at appropriate collection points
provided in your country.
Guarantee
We grant 1 years guarantee on the product commencing on the date of purchase.
This guarantee does not cover: damage due to improper use, normal wear or use as well as
defects that have a negligible effect on the value or operation or the appliance. The guarantee
becomes void if repairs ars undertaken by unauthorized persons and if original parts are not used.
