16
STAND UNIT
17
Infinitely Expandable
S
TAND UNIT
Attach the PEG and Guide Pin to the MPDP.
1
Assemble the four PEGs at the back of MPDP.
y
Install the Guide Pins where MPDP touches.
y
There is a hole for
the installation of
the Guide Pin at the
upper part and the
sides.
Guide.Pin
Installing the MPDP
3.
Fasten 4 PEGs in the back
of MPDP with M5*25 bolts.
PEG
M5*25
Install the MPDP from the lower part of the middle set.
2
Insert the PEGs in the PEG holes.
y
Put the set down slowly. The panels can be damaged by impact.
y
Install the MPDP from the bottom of both sides after completing the installation at the
y
lower middle part.
If you need to detach a MPDP set in the lower line, move
the set in the upper line to position "C". Remove guide
pins from the set in the lower line, move it to position "A"
and detach from the main frame.
1
4
7
2
5
3
6
Summary of Contents for MPDP
Page 24: ...44 WALL UNIT MEMO ...
