3
OPERATION INSTRUCTIONS
1. Don’t turn on the device if it’s been through severe temperature changes, especially after
transportation. Operate at a stable temperature, avoiding drastic temperature changes to help
avoid damage to the LEDs (etc) due to these environment changes.
2. Avoid excessive shock or vibration of this device during transportation or when being moved.
3. Do not handle the light by the head only to help stop any damage to the mechanical parts.
4. Do not expose the device to excessive heat, moisture or environments with dust, especially
during installation. Also, to avoid electric shock, do not run the power lines across the floor.
5. Make sure the location of install is in safe and in good condition before installing the device.
6. Ensure the safety chain is secured properly and check whether the screws are fastened properly.
7. Make sure the lenses are in good condition, it’s recommended to replace any lens if there is any
damage or scratches.
8. Make sure the device is operated by qualified personnel who know how to operate the device.
9. It’s recommended to keep the original packaging.
10. Do not try to change or modify the device without any instruction by the manufacturer, a quali-
fied technician and authorized service agent.
11. Warranty is void if there are any malfunctions due to not following the owner’s manual instructions
or if operated if not in fully working condition (short circuit, electronic shock, lamp broke, etc.).
MENU OPERATIONS
MENU:
Access the menu.
UP:
Add key or selection on the key; increase the value function, shift on the menu.
DOWN:
Reduction key or key under the selected; decrease the value function down menu.
ENTER:
It is used to select and confirm/store the current selection.
MENU
DOWN ENTER
UP
