1
Made in USA
Installation Instructions
©2017Orion Energy Systems, Inc. All rights reserved. Orion and Light Years Ahead are trademarks/
service marks of Orion Energy Systems, Inc. Design modification rights reserved. 20170713
O ri o n E n e rgy Sy s te m s , I n c .
orionlighting.com
1. 8 0 0 . 6 6 0 . 9 3 4 0
Use this instruction to install the fixture end cap kit in the
field.
LED-HBHS-EC01-KIT Components
1
(2) End Caps
2
Hardware for End Caps (4)
Tools Required for Installation
-Cordless drill
Step-by-Step Instructions
HBHS1 Field Installation Instructions
Instruction Number: P-INT-X-399
1
Unpack kit components. See Fig. 1 for HBHS1 without
end cap installed.
2
Place end cap onto fixture arm bar as shown in Fig.
2.
3
Screw end cap securely into place with hardware
provided. (See Fig. 3)
4
Repeat Step 2 and Step 3 on opposite end of fixture.
5
Proceed to mount fixture per customer selected
mounting method and complete electrical connections
to NEC/local code.
1
2
3
WARNING!
Risk of fire or electric shock. To reduce risk
of electrical shock, turn off power supply
before installation or servicing.
1. Field installers are responsible for recognizing specific site
requirements and making adjustments to assure a complete,
functional installation.
2. Make all power connections using UL listed components.
3. Electrical connections must be made by a qualified electrician
and in accordance with NEC and local codes.
Use this instruction to install the lens kit in the field.
LED-HBHS-LF01-KIT Components
1
Lens, Frosted Acrylic
2
(2) End Caps
3
Hardware for End Caps (4)
Tools Required for Installation
-Cordless drill
Step-by-Step Instructions
1
Unpack kit components. Follow Step 2 and Step 3
from end cap kit installation above.
2
Remove film from both sides of the lens. Insert lens
into fixture body with shiny side of lens facing away
from the fixture. (See Fig. 1a)
3
Complete installation of end cap as seen in Fig. 2a.
4
Proceed to mount fixture per customer selected
mounting method and complete electrical connections
to NEC/local code.
1a
2a
