background image

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

CAUTION! The entire installation instructions should be fully read and understood, including all of the safety symbols and safety precautions
before beginning installation.  The installation instructions should be read, understood and followed to prevent personal injury or propert
damage. Keep these installation instructions in an easily accessible location for future reference. 

Indicates that the power plug is to be disconnected from 
the power outlet. 

Safety precautions must be taken at all times. 

Warning and caution in general 

WARNING! 

The wall, floor or ceiling should be capable of supporting a weight of at least five (5) times the monitor’s weight. If it cannot, the wall, floor o
ceiling must be reinforced. Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to
Failure to do so could result in serious personal injury. 

CAUTION! The ceiling structure must be capable of supporting a maximum weight of 400 lbs. If not, the ceiling must be reinforced. Prope
installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result i
serious personal injury. 

CAUTION! Make sure to hold the plasma display, or projector, securely and remove it from the mount to make the height adjustment prior t
loosening the adjustment screws. Do not remove the screws completely from the extension loosen all at once. Loosen, remove, adjust then re
tighten the screws. Failure to do so could result in injury and or damage to the plasma display or projector. 

Summary of Contents for CMK-01







Reviews: