manualshive.com logo in svg

Orion 7152, Instruction Manual

Share
Download
Orion 7152 Instruction Manual Download Page 8

8

Corporate Offices:

 89 Hangar Way, Watsonville CA 95076 - USA

Toll Free USA & Canada:

 (800) 447-1001 

International:

 +1(831) 763-7000

Customer Support:

 [email protected]

Copyright © 2020 Orion Telescopes & Binoculars. All Rights Reserved. No part of this product 

instruction or any of its contents may be reproduced, copied, modified or adapted, without the 

prior written consent of Orion Telescopes & Binoculars.

A N   E M P L O Y E E - O W N E D   C O M P A N Y

One-Year Limited Warranty

This Orion product is warranted against defects in materials or workmanship for 

a period of one year from the date of purchase. This warranty is for the benefit of 

the original retail purchaser only. During this warranty period Orion Telescopes & 

Binoculars will repair or replace, at Orion’s option, any warranted instrument that 

proves to be defective, provided it is returned postage paid. Proof of purchase 

(such as a copy of the original receipt) is required. This warranty is only valid in the 

country of purchase.
This warranty does not apply if, in Orion’s judgment, the instrument has been 

abused, mishandled, or modified, nor does it apply to normal wear and tear. This 

warranty gives you specific legal rights. It is not intended to remove or restrict your 

other legal rights under applicable local consumer law; your state or national statu-

tory consumer rights governing the sale of consumer goods remain fully appli-

cable. 
For further warranty information, please visit www.OrionTelescopes.com/warranty.

Summary of Contents for 7152









Reviews:

No comments

Brands by name

Popular brands

Load more brands