•
Lowest Recommended Impedance is 0.5
Ω
Stereo.
•
RCA inputs are connected to both left and right channels
•
Left Phase switch set to 0°
•
Right Phase switch set to 0°
•
Gain controls can be set together or independently of each other
•
Output can be configured for high-pass, low-pass, band-pass or full range operation.
•
Output is configured either for stereo operation.
TUNING NOTE:
The phase switches can be individually switched for improved sound quality. Try different phase switch positions
for best sonic results. The high-pass crossover can be used as a subsonic filter with INTELLi Q. Configure the
high-pass crossover for “LOW” frequency range operation and set according to instructions explained in the
High-pass Crossover Section in this manual.
page 25
Summary of Contents for 250R & 275R
