Orion 10274 Instruction Manual Download

Page: 16 / 16

One-Year Limited Warranty

This Orion product is warranted against defects in materials or workmanship for a period of one year from the date

of purchase. This warranty is for the benefit of the original retail purchaser only. During this warranty period Orion

Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be defec-

tive, provided it is returned postage paid. Proof of purchase (such as a copy of the original receipt) is required. This

warranty is only valid in the country of purchase.

This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or modified, nor

does it apply to normal wear and tear. This warranty gives you specific legal rights. It is not intended to remove or

restrict your other legal rights under applicable local consumer law; your state or national statutory consumer rights

governing the sale of consumer goods remain fully applicable.

For further warranty information, please visit

www.OrionTelescopes.com/warranty.

Orion

Telescopes & Binoculars

Corporate Offices: 89 Hangar Way, Watsonville CA 95076 - USA

Customer Support:

www.OrionTelescopes.com/contactus

written consent of Orion Telescopes & Binoculars.

Summary of Contents for 10274

















Search results

Summary of Contents for 10274

Reviews:

Related manuals for 10274

Brands by name

Popular brands

Orion 10274, Instruction Manual

Search results

Summary of Contents for 10274

Reviews:

Related manuals for 10274

Brands by name

Popular brands