3
4.
To attach the camera when ready to polar-align, place the camera with the
installed base plate onto the mounting ring, and tighten the thumbscrew to
secure it in place. Orient the camera so the USB port is pointed left when
you are standing in front of the camera and mount
(Figure 5)
.
5. The camera can be left installed on the mount, but for safety while
transporting, it’s best to loosen the setscrew, remove the camera, and
Figure 2.
The mount ring
section inserted into the
mount’s polar axis opening.
Figure 3.
Tighten the two
setscrews using the included
allen wrench. There isn’t a
lot of room to maneuver the
wrench, so it might take a
couple of turns to snug down.
Figure 4.
Screw the base
ring section onto the back of
the camera using the included
screws, and a screwdriver.
Figure 5.
The
camera is attached
to the mount, and
oriented with the
USB port facing
the left side of the
mount.
