2
Carefully lift the top lid directly upwards to remove it from the bottom base.
Be careful not to touch the lens to avoid having to clean it. Place the lid in a safe location.
(Cleaning supplies sold separately by Orion)
Next remove the Black Collar ring from the inside of the lid. The Black Collar Ring is held
in place by 4 small tabs of the metal inner ring that holds the Black Collar Ring in place.
Next unscrew the 4 small screws located on the inside of the AllSky dome lid with a small
Philips head screwdriver in order to remove the metal inner ring clamp and free the dome
from the lid.
The old dome can now be removed. Attached to the old dome is a thin rubber gasket ring.
Remove the gasket ring from the old dome and place onto the replacement dome until the
gasket is seated at the bottom flange of the dome.
Seat the replacement dome back into dome lid paying attention to where the gasket is
located.
For the housing to remain waterproof it is critical that the gasket is seated correctly at the
base of the flange on the dome.
Fasten the metal inner ring clamp back onto the inside of the top lid using the 4 screws
previously unscrewed.
Insert the black collar ring back into the bottom of the dome lid using the metal tabs of the
inner ring to hold the Black Collar ring in place.
You may wish to refocus your lens now that the dome is open.
The dome lid can now be reattached to the base. To re attach the dome lid carefully line up
the groove on the inside of the top lid with the notch on the inside of the bottom base and
gently allow the top lid to drop into place. The top lid should now be seated evenly and all
4 screws lined up ready for installation.
Using the tamper proof Allen key, gently tighten each screw until a small amount of resis-
tance is felt, then move onto the next screw. Repeat for all screws. Next tighten each screw
more firmly and evenly across all 4 screws to help ensure a weatherproof seal.
Your Orion Starshoot AllSky Camera is now ready for use. Please follow instructions found
within the AllSky manual for operating instructions.
Specifications
• Acrylic Dome
One-Year Limited Warranty
This Orion StarShoot AllSky Camera Replacement Acrylic Dome is warranted against defects
in materials or workmanship for a period of one year from the date of purchase. This warranty is
for the benefit of the original retail purchaser only. During this warranty period Orion Telescopes
& Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to
be defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way,
Watsonville, CA 95076. If the product is not registered, proof of purchase (such as a copy of the
original invoice) is required.
This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled,
or modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights,
and you may also have other rights, which vary from state to state. For further warranty service
information, contact: Customer Service Department, Orion Telescopes & Binoculars, 89 Hangar
Way, Watsonville, CA 95076; (800) 676-1343.
