background image

3

WARNING:

Never look directly at the Sun

through your telescope or its finder scope—
even for an instant—without a professionally
made solar filter that completely covers the
front of the instrument, or permanent eye
damage could result. Young children should use
this telescope only with adult supervision.

Table of Contents

1. Unpacking ............................................................................................................................. 3

2. Parts List ............................................................................................................................... 3

3. Assembly .............................................................................................................................. 4

4. Getting Started...................................................................................................................... 5

5. Using your Telescope–Astronomical Observing ..................................................................... 6

6. Care and Maintenance............................................................................................................ 8

7. Specifications.......................................................................................................................... 8

Appendix A: Collimation (Aligning the Mirrors)............................................................................ 9

Appendix B: Cleaning the Optics............................................................................................... 11

1. Unpacking

The entire telescope system will arrive in one box.
Be careful unpacking the box. We recommend
keeping the original shipping container. In the
event that the telescope needs to be shipped to
another location, or returned to Orion for warranty
repair, having the proper shipping container will
help ensure that your telescope will survive the
journey intact.

Make sure all the parts in the Parts List are pres-
ent. Be sure to check the box carefully, as some
parts are small. If anything appears to be missing
or broken, immediately call Orion Customer
Support (800-676-1343) for assistance.

2. Parts List

Qty.

Description

Optical tube assembly

1 Altazimuth 

mount

Altitude micro-motion rod with thumbwheel

3

Tripod legs

1

Accessory tray bracket

Finder  scope

Finder scope bracket

1 Accessory 

tray

3

Tripod attachment screws with wing nuts and washers

3

Accessory tray attachment screws with 
lock nuts and washers

3

Leg lock knobs

2 Yoke 

knobs

25mm Explorer II eyepiece

10mm Explorer II eyepiece

1 Dust 

cover

1

Collimation cap

2

Assembly tools (Philips head screwdriver,
triangular assembly tool)

Summary of Contents for SpaceProbe 3 Altaz 9841













Reviews: