![background image](http://html.mh-extra.com/html/oring/trgps-9084gt-m12x-bp2-mv/trgps-9084gt-m12x-bp2-mv_user-manual_1652005085.webp)
TRGPS-9084GT-M12X-BP2-MV User
Manual
ORing Industrial Networking Corp
84
remapped DSCP value is always taken from the '
DSCP
Translation->Egress Remap DP0
' table.
Remap DP Aware
: DSCP from the analyzer is remapped and the
frame is remarked with a remapped DSCP value. Depending on
the DP level of the frame, the remapped DSCP value is either
taken from the '
DSCP Translation->Egress Remap DP0
' table or
from the '
DSCP Translation->Egress Remap DP1
' table.
5.6.5 Policing
Policing is a traffic regulation mechanism for limiting the rate of traffic streams, thereby
controlling the maximum rate of traffic sent or received on an interface. When the traffic rate
exceeds the configured maximum rate, policing drops or remarks the excess traffic. This page
allows you to configure Policer for all switch ports.
Port Policing
Label
Description
Port
The port number for which the configuration below applies
Enable
Check to enable the policer for individual switch ports
Rate
Configures the rate of each policer. The default value is
500
. This
value is restricted to 100 to 1000000 when the
Unit
is
kbps
or