Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Q
uick
I
nstallation
G
uide
ORing Industrial Networking Corp.
Copyright© 2016 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oring-networking.com
E-mail: [email protected]
Version 1.0
Q I G
Specifications
Switch
EN50155
I N D U S T R I A L
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
212(W) x 75(D) x 198(H) mm (8.35 x 2.95 x 7.8 inch.)
Weight (g)
1462g
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-32
IEC60068-2-6
Vibration
Free Fall
Warranty
5 years
EN60950-1
Safety
-40 to 70 C (-40 to 158 F)
o
o
Operating Temperature
ORing Switch Model
10/100 Base-T(X) Ports in M12 Auto
MDI/MDIX with P.S.E.
8 x M12 connector (4 pin D-coding)
Physical Ports
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.)
8192 MAC addresses
MAC Table
4
Priority Queues
TPS-3082GF-MM-M12-QODC
1. Launch the Internet Explorer and type in IP address of the device. The default static
IP address is
192.168.10.1
Follow the steps below to log in and access the system:
2. Log in with default user name and password (both are
).
admin
3. After logging in, you should see the following screen. For more information on
configurations, please refer to the user manual. For information on operating the device
using ORing’s Open-Vision management utility, please go to ORing website.
Resetting
To restore the device configurations back to the factory defaults, press the
button for a
few seconds. Once the power indicator starts to flash, release the button. The device will then
reboot and return to factory defaults.
Reset
RS-232 Serial Console Port
RS-232 in M12 connector (5-pin A-coding). Baud rate setting: 9600bps, 8, N, 1
Store-and-Forward
Processing
Switch Properties
Switching latency: 7 us
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 1024
Port rate limiting: User Define
Configurations
After installing the
and connecting cables, start the
evice by
turning on power. The green power LED should turn on. Please refer to the
following table for LED indication.
switch
d
1000Base-SX Fiber Ports in
Q-ODC connector
2 x Q-ODC connector
EN50155 10-port managed
PoE Ethernet switch
LED
Color
Status
Description
PWR1
Green
On
DC power module 1 activated
PWR2
Green
On
DC power module 2 activated
R.M
Green
On
System running in Ring Master mode
Ring
Green
On
System running in Ring mode
Fault
Amber
On
System errors (power failure or port link down)
10/100Base-T(X) Ports
On
Port is linked
LNK/ACT
Green
Blinking
Transmitting data
PoE
Green
On
Port providing power to PD
On
Port running in full-duplex mode
DPX/COL
Amber
Blinking
Collision occurs
Gigabit Fiber Ports
On
Port is linked
LNK/ACT
Green
Blinking
Transmitting data
Fiber Ports Number
2
Fiber
P
ort
S
pecification
Fiber Diameter (µm)
62.5/125
50/125
µm@
µm
Fiber Optical Connector
Q-ODC
Typical Distance (Km)
0.55 Km
Wavelength (nm)
850 nm
Max. Output Optical Power (dbm)
-4 dbm
Min. Output Optical Power (dbm)
-9.5 dbm
Max. Input Optical Power
Saturation
(
)
0 dbm
Min. Input Optical Power
Sensitivity
(
)
-18 dbm
Link Budget (db)
8.5 db
Fiber Ports Standard
1000Base-SX
Fiber Mode
Multi-mode
Security Features
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP v1/v2c/v3 encrypted authentication and access security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Power
Redundant Input Power
Power Consumption(Typ.)
Dual DC inputs. 48VDC on 5-pin M23 connector
10.75 Watts
Fault Contact
Relay
Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin M12 A-coding)
Overload Current Protection
Reverse Polarity Protection
Present
Present
Network Redundancy
O-Ring
Open-Ring
O-Chain
STP
RSTP
MSTP
Warning / Monitoring System
Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support
PoE Output Power
120 Watts
TPS-3082GF-MM-M12-QODC
TPS-3082GF-MM-M12-QODC
