Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Q
uick
I
nstallation
G
uide
Version 1.0
Q I G
Specifications
S w i tc h
E N 5 0 1 5 5
I N D U S T R I A L
1. Launch the Internet Explorer and type in IP address of the device. The default static
IP address is
192.168.10.1
Follow the steps below to log in and access the system:
2. Log in with default user name and password (both are
).
admin
3. After logging in, you should see the following screen. For more information on
configurations, please refer to the user manual. For information on operating the device
using ORing’s Open-Vision management utility, please go to ORing website.
Resetting
To restore the device configurations back to the factory defaults, press the
button for a
Reset
few seconds. Once the power indicator starts to flash, release the button. The device will then
reboot and return to factory defaults.
Configurations
Power
Redundant Input Power
Dual DC inputs. 48VDC on 5-pin M23 connector
21 Watts (power consumption of P.S E. is not included)
.
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
320(W) x 91.3(D) x 228(H) mm (12.6 x 3.59 x 8.98 inch.)
Weight (g)
3113 g
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-32
IEC60068-2-6
Vibration
Free Fall
Warranty
5 years
EN60950-1
Safety
Fault Contact
Relay
Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin M12 A-coding)
Overload Current Protection
Reverse Polarity Protection
Present
Present
-40 to 75 C (-40 to 167 F)
o
o
Operating Temperature
ORing Switch Model
10/100/1000 Base-T(X) with
P.S.E. Ports in M12 Auto
MDI/MDIX
16 x M12 connector (8 pin A-coding)
Physical Ports
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1d for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification
8K
MAC Table
8
Priority Queues
10/100/1000Base-T(X) ports
in M12 Auto MDI/MDIX
8 x M12 connector (8-pin A-coding)
Store-and-Forward
Processing
Switch Properties
Switching latency: 7 us
Switching bandwidth: 48 Gbps
Max. Number of Available VLANs: 4095
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Radius centralized password management
SNMP v1/v2c/v3 encrypted authentication and access security
Https / SSH enhance network security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250units
Support TTDP Protocol (Train Topology Discovery Protocol) to map the IP address automatically
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server / Client support
SNTP, NTP for synchronizing of clocks over network
SMTP Client
Modbus TCP
Network Redundancy
O-Ring
O-Chain
MRP
(*Note)
MSTP (RSTP/STP compatible)
PoE Output Power
TGPS-9168GT-M12
Up to 9.6K Bytes
Jumbo frame
RS-232 Serial Console Port
RS-232 in M12 (5-pin M12 A-coding) connector with console cable. 115200bps, 8, N, 1
Power Consumption(Typ.)
240 Watts
After installing the
and connecting cables, he green power LED
switch
t
should turn on. Please refer to the following tablet for LED indication.
EN 55022, EN 55024(CE EMC),EN 50121-4,EN 60945, FCC, EN 50121-3-2(EN50155), EN 61000-6-2,
EN 61000-6-4,IEC 61000-3-2 ,IEC 61000-3-3
EMC
IEC 60571, IEC 62236-3-2
Railway
*Note: This function is available by request only
TGPS-9168GT-M12
TGPS-9168GT-M12
EN50155 24-port managed
Gigabit PoE Ethernet switch
LED
Color
Status
Description
PWR1
Green
On
DC power module 1 activated
PWR2
Green
On
DC power module 2 activated
R.M
Green
On
Device operating in Ring Master mode
Ring
Green
On
Ring enabled
Blinking
Ring structure is broken
Fault
Amber
On
Errors occur (i.e. power failure or port malfunctioning)
10/100/1000Base-T(X) P.S.E Ethernet ports
LNK/ACT
Green
On
Port is linked
Blinking
Transmitting data
PoE
Green
On
Power supplied over Ethernet
Speed
Green
On
Port is running at 1000Mbps
Amber
On
Port is running at 100Mbps
Green/Amber
Off
Port is running at 10Mbps
10/100/1000Base-T(X) Ethernet ports
LNK/ACT
Green
On
Port is linked
Blinking
Transmitting data
Speed
Green
On
Port is running at 1000Mbps
Amber
On
Port is running at 100Mbps
Green/Amber
Off
Port is running at 10Mbps
ORing Industrial Networking Corp.
Copyright© 2017 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oringnet.com
E-mail: [email protected]
