TGAP-W1601+ Series User Manual
ORing Industrial Networking Corp
15
3.3
Wiring
For pin assignments of the power connector, please refer to the following tables.
3.3.1
Grounding
Grounding and wire routing help limit the effects of noise due to electromagnetic interference
(EMI). Run the ground connection from the grounding pin on the power connector to the
grounding surface prior to connecting devices.
3.3.2
Power Port Pinouts
The device supports two sets of power supplies and uses the M12 5-pin female connector on
the front panel for the dual power inputs.
Step 1
: insert the negative/positive wires into the V-/V+ terminals, respectively.
Step 2
: to keep the DC wires from pulling loose, use a small flat-blade screwdriver to tighten
the wire-clamp screws on the front of the terminal block connector.
