TAR-120-M12 / TAR-3120-M12 User’s Manual
ORing Industrial Networking Corp. 21
DHCP
DHCP stands for Dynamic Host Control Protocol. The TAR-120-M12 /
TAR-3120-M12 AP router was built-in DHCP server. The internal DHCP server will
assign an IP address to the computers (DHCP client) on the LAN automatically.
Set your computers to be DHCP clients by setting their TCP/IP settings to obtain
an IP address automatically. The DHCP server will allocate an unused IP address
from the IP address pool to the requesting computer automatically.
1. DHCP Sever
DHCP Server Screen
The following table describes the labels in this screen.
Label
Description
DHCP Mode
Select built-in DHCP server or DHCP Forwarder
DHCP Server
Enable or Disable the DHCP Server. The default setting is
Enabled
.
Starting IP
The starting IP address of the IP range for the DHCP server
Ending IP
The ending IP address of the IP range for the DHCP server
Summary of Contents for TAR-120-M12
Page 5: ......
