Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Version 1.0
Q
uick
I
nstallation
G
uide
M A N A G E D
Rack-Mount
GIGABIT
SWITCH
1. Launch the Internet Explorer and type in IP address of the switch. The default static IP address is
192.168.10.1
2. Log in with default user name and password (both are
). After logging in, you should see
admin
the following screen. For more information on configurations, please refer to the user manual.
For information on operating the switch using ORing’s Open-Vision management utility, please go
to ORing website.
Resetting
To reboot the switch, press the
button for 2-3 seconds.
Reset
To restore the switch configurations back to the factory defaults, press the
button for 5 seconds.
Reset
Specifications
ORing Switch Model
Physical Ports
Technology
Ethernet Standards
10/100/1000Base-T(X) with
P.S.E. RJ45 Auto MDI/MDIX
RS-232 Serial Console Port
Software Features
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
Modbus TCP
SNTP server
SMTP Client
Network Redundancy
O-Ring, O-Chain, MRP
, MSTP (RST/STP compatible), Fast Recovery
*Note
RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1
RGPS--LP
24
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table
32K
Packet Buffer
32Mbits
Power
Power consumption(Typ.)
Overload current protection
Present
Power input
100~240VAC with power socket
1G/10GBase-X with SFP+ port
4
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
Operating Temperature
Physical Characteristic
Dimension (W x D x H)
Weight (g)
6270g
5% to 95% Non-condensing
Operating Humidity
Enclosure
19 inches rack mountable
431 (W) x 342 (D) x 44 (H) mm (16.97 x 13.47 x 1.73 inches)
-20 to 60 C (-4 to 140 F)
o
o
Regulatory Approvals
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMI
EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
EMS
Warranty
5 years
MTBF
249,143 hrs
IEC60068-2-27
Shock
IEC60068-2-31
Free Fall
IEC60068-2-6
Vibration
EN60950-1
Safety
Fault Contact
Relay
None
Wiring
Both RGPS--P and RGPS--LP come with an AC
power socket at the back of the switch. Simply insert the AC power cable
to the power connector and turn on the power switch. The input voltage is
AC100V~240V / 50~60Hz.
AC Power Connection
All of the three models can be powered by DC power. The dual DC power
inputs along with relay contacts are located on the terminal block.
STEP 1:
Insert the negative/positive wires into the V-/V+ terminals,
respectively.
STEP 2:
To keep the DC wires from pulling loose, use a small flat-blade
screwdriver to tighten the wire-clamp screws on the front of the terminal
block connector.
DC Power Connection
10/100Base-T(X) MDI/MDI-X
Pin Number
MDI port
MDI-X port
1
TD+(transmit)
RD+(receive)
2
TD-(transmit)
RD-(receive)
3
RD+(receive)
TD+(transmit)
4
Not used
Not used
5
Not used
Not used
6
RD-(receive)
TD-(transmit)
7
Not used
Not used
8
Not used
Not used
Note: “+” and “-” signs represent the polarity of the wires that make up
each wire pair.
To connect the console port to an external management device, you need an DB-9
cable, which is also supplied in the package. Below is the console port pin assignment
information.
Console Port Pin Definition
PC RS-232 to DB9 (male) pin
assignment
RS-232 with DB9 (female) pin
assignment
PIN#2 RxD
PIN#2 RxD
PIN#3 TxD
PIN#3 TxD
PIN#5 GND
PIN#5 GND
10/100Base-T(X) RJ-45
Pin Number
Assignment
1
TD+
2
TD-
3
RD+
4
Not used
5
Not used
6
RD-
7
Not used
8
Not used
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screws to the grounding surface prior to connecting devices.
Grounding
Configurations
After installing the switch and connecting cables, start the switch by turning on power.
The green power LED should turn on.
LED indication table
LED
Color
Status
Description
PWR
Green
On
System power is connected
R.M.
Green
On
Device is operating as a ring master
On
Ring is enabled and device is running in Ring mode
Ring
Green
Blinking
Ring structure is broken
Fault
Amber
On
Errors occur (power failure or port malfunctioning)
10/100/1000Base-T(X) RJ45 port
Green
On
Port is linked and runs at 1000Mbps
Link/Act
Amber
On
Port is linked and runs at 10/100Mbps
PoE
Green
On
Power is supplied over Ethernet cable
1G/10G SFP+ port
On
Port is connected
Link/Act
Green
Blinking
Transmitting data
RGPS--P
RGPS-
75 Watts
Max PoE output
720 Watts (
-20 C~50 C)
o
o
320 Watts (50
o
o
C~60 C)
100~240VAC with power socket
50~57VDC with terminal block
720 Watts
Reverse Polarity Protection
Not Present
5580g
4445g
Switch Properties
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
MAC-based authentication (802.1x)
VLAN (802.1Q) to segregate an secure network traffic
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
IP source guard
Switch latency: 7 us
Switch bandwidth: 128Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Processing
Store-and-Forward
Jumbo frame
Up to 10K Bytes
Priority Queues
8
Flash Memory
128Mbits
DRAM Size
1Gbits
RGPS- Series
RGPS- Series
Layer-3 Managed Gigabit PoE
Ethernet Switch
ORing Industrial Networking Corp.
Copyright© 2017 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oringnet.com
E-mail: [email protected]
Present
Power supply
1000 Watts
390 Watts
power supply not included
49 Watts
40 Watts
300 Watts (
-20 C~50 C)
o
o
240 Watts (50
o
o
C~60 C)
CE EMC (EN 55024, EN 55032), FCC Part 15 B
EMC
Warranty
5 years
214,432 hrs
296,701 hrs
*Note: This function is available by request only
