Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Q
uick
I
nstallation
G
uide
Q I G
Version 1.0
ORing Industrial Networking Corp.
Copyright© 2018 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oringnet.com
E-mail: [email protected]
I N D U S T R I A L
GIGABIT
Injector
PoE
Industrial Gigabit PoE++ Injector
Network Connection
The device has standard Ethernet ports. According to the link type, the AP uses CAT
3, 4, 5, 5e, 6 UTP cables to connect to any other network device (PCs, servers,
switches, routers, or hubs). Please refer to the following table for cable specifications.
Cable
Type
Max. Length
Connector
10BASE-TX
Cat. 3, 4, 5 100-ohm
UTP 100 m (328 ft)
RJ-45
100BASE-TX
Cat. 5 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
1000BASE-T
Cat. 5/Cat. 5e 100-ohm UTP
UTP 100 m (328ft)
RJ-45
For pin assignments for different types of cables, please refer to the following tables.
10/100 Base-TX
1000 Base-T
RJ-45 Input (Data Only)
RJ-45 Output (Data and Power)
Pin
Symbol
Description
Symbol
Description
1
BI_DA+
Data BI_DA+
BI_DA+
(
Vdc1+
)
Data BI_DA+ and
Feeding Power(+)
2
BI_DA-
Data BI_DA-
BI_DA-
(
Vdc1+
)
Data BI_DA- and
Feeding Power(+)
3
BI_DB+
Data BI_DB+
BI_DB+
(
Vdc1-
)
Data BI_DB+ and
Feeding Power(-)
4
BI_DC+
Data BI_DC+
BI_DC+
(Vdc2+)
Data BI_DC+
Feeding Power(+)
5
BI_DC-
Data BI_DC-
BI_DC-
(Vdc2+)
Data BI_DC-
Feeding Power(+)
6
BI_DB-
Data BI_DB-
BI_DB-
(
Vdc1-
)
Data BI_DB- and
Feeding Power(-)
7
BI_DD+
Data BI_DD+
BI_DD+
(Vdc2-)
Data BI_DD+
Feeding Power(-)
8
BI_DD-
Data BI_DD-
BI_DD-
(Vdc2-)
Data BI_DD-
Feeding Power(-)
RJ-45 Input (Data Only)
RJ-45 Output (Data and Power)
Pin
Symbol
Description
Symbol
Description
1
Rx+
Data Receive
Rx+
(
Vdc1+
)
Data Receive and
Feeding power(+)
2
Rx-
Data Receive
Rx-
(
Vdc1+
)
Data Receive and
Feeding power(+)
3
Tx+
Data Transmit
Tx+
(
Vdc1-
)
Data Transmit and
Feeding power(-)
4
NC
Not Connected
NC
(Vdc2+)
Not Connected
Feeding power(+)
5
NC
Not Connected
NC
(Vdc2+)
Not Connected
Feeding power(+)
6
Tx-
Data Transmit
Tx-
(
Vdc1-
)
Data Transmit and
Feeding power(-)
7
NC
Not Connected
NC
(Vdc2-)
Not Connected
Feeding power(-)
8
NC
Not Connected
NC
(Vdc2-)
Not Connected
Feeding power(-)
PWR
10/100/1000T
Data IN
PoE OUT
PoE
Sync
PoE Mode
Async
INJ-101GT++-100W-24V
Configurations
After installing the device and connecting cables, the green power LED should turn on.
Please refer to the following table for LED indication.
LED
Color
Status
Description
Power
Green
On
Power is on and functioning Normally
PoE
Blue
On
PoE Device Link
Off
None PoE Device Detected
Blink
Overload present
Specifications
ORing PoE Injector Model
INJ-101GT++-100W-24V
10/100/1000Base-T(X) P.S.E.
Port in RJ45 Auto MDI/MDIX
1
Physical Ports
Operating Voltage
Input Voltage
50 ~ 57 VDC on 4-pin terminal block
LED Indicators
PWR: 1 x LED
Green On: Power is on and functioning Normally.
Power indicator
PoE Indicator
Protection
Short Circuit Protection
Over Load Protection
Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
26.1(W) x 70(D) x 95(H)mm
(1.03x 2.76 x 3.74inch.)
Weight (g)
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
Operating Temperature
5% to 90% Non-condensing
Operating Humidity
Regulatory Approvals
CE EMC (EN 55024, EN 55032), FCC Part 15B
EMC
EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),
IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
EMS
IEC60068-2-27
Shock
IEC60068-2-31
Free Fall
1 x LED
Blue On: PoE Device Link
Off : None PoE Device Detected
Blink (Blue) : Overload present
188 g
-40 to 75 C (-40 to 167 F)
o
o
10/100/1000 Base-T(X) Ports
in RJ45 Auto MDI/MDIX
1
Present
INJ-101GT++-100W
12 ~ 57 VDC on 4-pin terminal block
41(W) x 70(D) x 95(H)mm
(1.61x 2.76 x 3.74inch.)
318 g
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15B class A
EMI
EN60950-1
Safety
MTBF
2570121hrs
Warranty
5 years
2300627hrs
PoE Mode
DIP Switch 1/2
*Note1
DIP Switch 1/2 (OFF): PoE P.S.E set to master and Asyncronize mode.
DIP Switch 1/2 (ON) : PoE P.S.E set to Syncronize mode(default)
Power
Input Power
Power Consumption
50 ~ 57 VDC on 4-pin terminal block
1 Watts (Not include PD's device)
12 ~ 57 VDC on 4-pin terminal block
PoE Power Budget
90Watts at 50VDC
100 Watts at 54VDC
30Watts at 12~24VDC
100Watts at 24~57VDC
IEC60068-2-6
Vibration
Note1: (1) By default, the output value of the high power PoE++ is in sync mode supports PoE
af/at-compliant P.D. devices.
(2) If you cannot enable the 60W PTZ camera, please set the DIP switch to Async mode
and reconnect power. This mode only supports Dual P.D mode. You may not connect
to an af/at-compliant P.D. device with this mode.
INJ-101GT++-100W Series
INJ-101GT++-100W Series