ORiNG IGS-3032GC User Manual Download Page 69

Page: 69 / 101

IGS-3032GC User’s Manual

5.1.12.2

MAC Address Aging

You can set MAC Address aging timer, as time expired, the unused MAC will be cleared

from MAC table. IGS-3032GC also support Auto Flush MAC Address Table When ports Link

Down.

MAC Address Aging interface

5.1.12.3

Port Statistics

Port statistics show several statistics counters for all ports

Port Statistics interface

The following table describes the labels in this screen.

Label

Description

Type

Show port speed and media type.

Link

Show port link status.

State

Show ports enable or disable.

TX GOOD Packet

The number of good packets sent by this port.

TX Bad Packet

The number of bad packets sent by this port.

RX GOOD Packet

The number of good packets received by this port.

RX Bad Packet

The number of bad packets received by this port.

TX Abort Packet

The number of packets aborted by this port.

Summary of Contents for IGS-3032GC






































































































Search results

Summary of Contents for IGS-3032GC

Reviews:

Related manuals for IGS-3032GC

Brands by name

Popular brands

ORiNG IGS-3032GC, User Manual

Search results

Summary of Contents for IGS-3032GC

Reviews:

Related manuals for IGS-3032GC

Brands by name

Popular brands