Orima ORM-128-X, Instruction Manual

Page: 221 / 238

EN -65-
CHAPTER -7: MAINTENANCE AND CLEANING OF YOUR
MACHINE (PUMP FILTER)
A ilter system which avoids threads remaining from your laun
-
dries and tiny materials from entering into the pump during water
discharging operation carried out by your machine after complet
-
ing washing so prolonging the lifecycle of your pump is avail
-
able. It is recommended that you clean your pump ilter once in 2
months. To clean pump ilter:
• To open the pump cover, you can use the
powder detergent spade (*) or liquid detergent
level plate coming out of your machine.
• Fit the end point of the plastic part to the gap
of the pump cover and push it back. This will
open the cover.
• Before opening the ilter cover, settle a vessel
in front of the ilter cover to prevent the water
remained in the machine from lowing on the
ground.
• Loosen the ilter cover in counter-clockwise
and then empty water.
Note: You may have to empty the water
collection vessel several times according to the
amount of water in the machine.
(*) Machinery speciications may vary depending on the product
purchased.