3
Symbols and Descriptions
Following symbols are to be located in Instruction manual.
Important information
Warning
Electric Warning
Dear User;
We aim to provide you with a high quality product manufactured in
our modern factory with great care and in compliance with total
quality control principles.
Therefore, we suggest you read the user manual carefully before
using the product and, keep it safe for future reference.
Pieces of packaging (plastic bags, polystyrene etc.) must not be left
within reach of children, as they are potentially dangerous. Please
dispose of packaging thoughtfully by the appropriate means.
THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE
WITH THE REGULATIONS IN FORCE AND ONLY USED IN A
WELL VENTILATED SPACE. READ THE INSTRUCTIONS
BEFORE INSTALLING OR USING THIS APPLIANCE'
INSTALLATION OF YOUR OVEN
This appliance must be installed in accordance with the Standards and
Regulations in force and only in a well ventilated space.
In your own interest and that of safety, it is a legal requirement, that all gas
appliances be installed by a Gas Safe Registered Installer and the
installation registered. Failure to install the appliance correctly could
invalidate any warranty or liability claims and lead to prosecution.
The cooker must be installed in accordance with:
All relevant British Standards / Codes of Practice, in particular BS 5440
Part 2 2000 and:
•
For Natural Gas – BS6172: 2004 and BS6891: 1988
•
For LP Gas – BS5482 Part 1 (when the installation is in a
permanent dwelling), Part 2, (when the installation is in a caravan or other
non permanent dwelling), or Part 3 (when installing is in a boat).
•
The Gas Safety (Installation and Use) regulations 1994 (as
amended 1998).
•
The relevant Building /IEE regulations.
The cooker may be installed in a kitchen / kitchen diner but NOT in a room
containing a bath or shower.
Important notices for the installation;
•
The panels adjacent to the oven must be made from heat –
resistant material.
•
This appliance must be installed by a competent person and with
particular attention to ventilation
•
The housing must be heat resistant to a temperature of 95 °C as
per EEC directives.
•
The oven can be installed into a Standard 600 mm built-under
housing unit as shown in
Figure-1, or in a tall housing unit when
built-in a column.
•
In both cases ventilation provisions must be made. Keep a gap at
the back of the housing unit of 85 - 90 mm depth.
