Function Setting
功能設定
5
涼 夏 冷 風 扇
1
.
1. Place the Fan Cooler on a stable and flat surface. Plug the Power Cord into an a.c.
220-230V electrical outlet. The LED screen will display the current room temperature.
POWER
POWER
POWER
4
.
送風模式
(MODE) :
按送風模式鍵
，設定所需送風模式：常風、自然風、或睡眠
4. MODE: Press the button to set the Fan Cooler as Normal, Natural, or Sleep mode.
5.
左右送風
(OSC):
按下左右送風鍵
，冷風扇以自動左右搖擺模式送風。如欲停止自
5. OSC: Press the button to allow the Fan Cooler to oscillate the wind direction. To
定時 左右送風 送風模式 風速 開/關
冷霧
The mode is displayed on the LED screen.
風。
LED
顯示屏將會顯示送風模式。
動左右搖擺送風，再按此鍵一次。
stop the oscillation, press the button again.
將冷風扇擺放於穩固的平面上，將插頭插入交流電壓
220-230V/50Hz
的獨立插座。室
內溫度顯示
LED
燈同時亮起。
3.
風速
(SPEED) :
按風速設定鍵 ，設定所需風速：低、中、或高。
LED
顯示屏將會顯
冷風扇可使用機身頂部按鍵操控
(
如圖
1
)
，或改用遙控器操控。
3. SPEED: Adjust the Fan Cooler speed to the desired level: Low, medium, or high by
pressing button. The speed setting is displayed on the LED screen .
2
.
The Fan Cooler may be operated by the control panel located on top of the Fan Cooler
(as shown in Figure 1) or by your remote control.
2. POWER: Turn the Fan Cooler ON by pressing the button, the Fan Cooler will start
at low speed.
圖
1
Figure 1
TIMER
OSC
SPEED
SPEED
MODE
MODE
POWER
POWER
SPEED
SPEED
SPEED
SPEED
MODE
MODE
MODE
OSC
OSC
示風速。
開/關
(
POWER
) :
按開/關 鍵，冷風扇以低檔啟動。
COOL
nigrum tower fan cooler
6.
定時設置
(TIMER):
按下定時設置鍵
，
選定
16
個不同的自動關機時間，分別由
0.5
至
8
小時，並顯示於
LED
顯示屏。
6. TIMER: Pressing the button to set desired auto power off time, There are 16 time
TIMER
intervals, from 0.5-hour to 8-hour.
TIMER