4
Propller Fan
Function Setting
功能設定
Maintenance
清理及維護
警告：不使用風扇時，經常保持拔除電源，及切勿將風扇浸於水或其他液體中。在
清潔本風扇前，先將風扇關掉及把電源線從插座拔出。
Housing & Guard: Clean the outside of the Fan with a soft cloth, to remove presistent dirt or
grime wipe down with a cloth that has been dampened with warm soapy water.
扇葉：將前網下方螺絲鬆脫後取出前網，使用濕潤軟布抹擦清潔扇葉。清潔後，放回前網並
用螺絲鎖緊，才可使用風扇。
Blade: Loose the screw and pull the front guard out. Clean the blade with a soft damp cloth,
place back and fix the front guard with the screw after cleaning.
注意：切勿使用含有腐蝕性的清潔劑或溶液清理風扇。
儲存：連同使用說明，把風扇存放於清涼及乾爽的地方。
WARNING: ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING. DO NOT
IMMERSE THE FAN IN WATER! BEFORE CLEANING, MAKE SURE THAT THE UNIT
HAS BEEN SWITCHED OFF AND IT IS UNPLUGGED FROM THE MAIN OUTLET.
外殼及前後網：清理時切勿將風扇浸於水或其他液體中。使用濕潤軟布抹擦清潔，頑固污垢
可用軟布沾上含肥皂的溫水抹擦。
CAUTION: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc., as they will damage
the Fan. NEVER use ALCOHOL or any other SOLVENTS.
STORAGE: Store the Fan with these instructions in the original box in a cool and dry place.
1.
將風扇擺放於穩固的平面上
，
將插頭插入電壓
220-240V
的獨立插座。
1. Place the Fan on a stable and flat surface. Plug the Power Cord into an a.c. 220-240V
electrical outlet.
2.
旋轉風速控制旋鈕
(7)
至所選風速檔位
: (1) -
低檔
，
(2) -
中檔
，
(3) -
高檔。
2. Turn the speed control knob (7) to desired speed: (1) - low speed, (2) - medium speed,
(3) - high speed.
3.
按下搖擺按鈕風扇以自動左右搖擺方式運作。如欲停止拉上搖擺按鈕即可。
3. Put down the oscillating knob (6) for oscillating and pull up the oscillating knob (6)
for fixed position.
4.
以手動方式調整上下送風角度。
4. The air flow can be adjusted upward or downward by simply moving the motor
housing up or down.