Step 10; See Figure 10:
Install Rear Curtain (14).
A.
Place the Rear Curtain onto the rear of the
frame. Close the snap flaps at the corners.
B.
Close the snap flaps around the Rear Posts
and the ends of the Rear Cross Bar.
14
C.
Secure the ties around the Rear Cross Bar.
Figure 10
Step 11; See Figure 11:
Install front Panel Vinyl (15).
15
A.
Insert the white rod into the sewn tunnel on
top of the Front Panel Vinyl.
Place the Front
Panel Vinyl over the tractor hood and cab frame.
Lay the top of the panel over the Front Cross Bar.
B.
Insert the Snow / Dozer Blade handle through
the opening in the vinyl and reconnect it to the
Blade if applicable.
NOTE:
If you are using a snow blower with a
manual chute crank handle open the “T” slot in
the right side of the panel to allow full travel of the
handle.
Figure 11
9
No
t fo
r
Rep
rod
uct
ion
