1
4
2
3
1
4
2
3
Adjusting Shade
7214
Pillar Table Light
7215
Pillar Floor Light
With roots dating back to the shipyards of nineteenth century London, Davey Lighting combines industrial
design, traditional craftsmanship and the finest raw materials. Authentic and unique, lights are manufac-
tured in England with the same attention to detail required for their original industrial purpose.
Simplicity of design and choice of finish, including weathered brass and copper, polished aluminium and
galvanised cast iron, make Davey lights equally suited to traditional or contemporary schemes.
Safety Instructions
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or Injury.
Please retain for future reference. When fitting is in operation, some parts will become hot; take care when
using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of the cable
does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be unplugged
from the power supply immediately and not operated until the damaged parts are fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any liquids.
Cleaning and Maintenance
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Switch off
power to the fitting before cleaning. Spare parts are available for this product, please see contact details on
the reverse.
230V ac 50Hz IP20
1 - Glass rod shade
2 - Base
3 - In-line floor/cord switch
4 - UK plug
Pillar Table & Floor
7214 - 7215
1
1
4
2
3
1
4
2
3
4
2
3
Assembly
Your lamp will arrive fully assembled with integral LED light source. Plug your lamp into a mains socket and
it is ready to use.
Unpacking
When unpacking your pillar floor light, do not lift from the top glazed section or pull this part up. Doing so
will risk damaging the light. Lift from the base only.
L
N
Live
KEY
Neutral
Earth
L =
N =
=
*Mains
Supply
Fitting
*After 2004, wiring installation colours changed:
LIVE
Brown replaces Red
EARTH
Green/Yellow sleeving
NEUTRAL Blue replaces Black
BROWN
GRN/YEL
BLUE
BROWN
GRN/YEL
BLUE
MADE IN BRITAIN
7214
7215
LAMP GUIDANCE
TYPE
WATTAGE
MODEL
10W
20W
LED
LED
Integral LED light source. DO NOT ATTEMPT TO REPLACE LAMP. In case of lamp failure contact original
point of purchase.
