Oxford Double
FT620/BR - Oxford Double Table Light
FF630/BR - Oxford Double Floor Light
230V ac 50Hz IP20
Fig 1
A
C
D
B
G
E
F
F
I
H
GU10
PAR16
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
HALOGEN
LED
n/a
10W
Supplied with 4.6W LED bulb * Use LED lamps only. Warm white (2700k) recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
- With the bulb installed, place the first 47mm washer (F) on top of the shoulders of the
shade bracket (H) . Next, place the cyclindrical shade on top of this washer.
- Place the 2nd large washer (F) on top of the shade hole, and then place the spacer (E)
on top of this, aligning the 3 legs with the legs of the shade bracket underneath (fig 1.)
- Put the small 20mm washer (D) over the threaded tube, onto the spacer.
- Place the conical shade (C) onto this, place the brass disc (B) on top (logo up) and fix
in place with the finial (A). DO NOT OVER TIGHTEN.
Contents
A
C
G
H
I
B
D
E
F
Contents
A
B
C
D
E
F
G
H
I
Finial
Disc
Conical shade
20mm Rubber washer
Spacer
47mm washer (x2)
Cylindrical shade
Base
Bulb
Contents
A
B
C
D
E
F
Base
Lampholder
Conical shade
Cylindrical shade
Plastic shade ring
Brass shade ring
B
- Place the large conical shade (C), then the smaller cylindrical shade (D)
over the lampholder (B) and hold in place.
- Next place the plastic shade ring (E) followed by the brass shade ring
(F) over the lampholder. Screw on the brass shade ring until the shades
are secure (make sure the brass shade ring is aligned when threading it
on)
- Gently screw a bulb. The light is now ready to use.
A
C
D
E
F
B
FT625/BR - Oxford Double Desk Light
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
E27
GLS
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
40W MAX
15W
28W
10W
BALL
Assembly
Contents
Assembly
C
D
E
F
A
