London
Wall Light
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
120V ac 60Hz
Installation Diagram
IP20
The London wall light is a new retro-flavoured wall light, featuring a spun aluminium semi-sphere
shade with a solid chromed or copper back plate, with matching curved arm. Cotton braided flex is
woven through the arm for a clean-lined, neatly tailored finish.
London Wall Light
E26
A
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
60W MAX
15W
42W
10W
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
Contents
1 - London Wall Fitting
2 - Fixing plate
3 - Side Fixing screws
Required for Installation
4 - Junction box
5 - Wire nuts
-
Screwdriver
Refer to diagrams on opposite page.
STEP 1
- Remove fixing plate (B) from backplate of fitting, removing the two side fixing screws (G).
STEP 2
- Make electrical connection using wire nuts (C); see instructions overleaf.
- Attach the fixing plate to the junction box (E) using the junction box screws (A).
STEP 3
- Fit the backplate (F) over the fixing plate (B) and secure using side fixing screws (G).
Installation and Assembly Instructions
BALL
1
3
2
STEP 1 & 2
STEP 3
F
G
A JUNCTION BOX SCREW*
B FIXING PLATE
C WIRE NUT*
D MAIN SUPPLY*
E JUNCTION BOX*
F BACKPLATE
G SIDE FIXING SCREWS
* not supplied
Key
US-FW517
A
B
C
D
E
4
5
