Hector
Clip Light
Hector Medium
E27
GLS
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
40W MAX
11W
n/a
7W
A British design classic in translucent bone china. With its moveable shade and smart cotton
braided flex, the Hector table light marries style and function. The range includes a selection of
simple bone china pendants, wall lights and floor lights, with several shade varieties.
FL344 Hector Medium Dome
FL281 Hector Small Dome
FL344CL Circle Line
FL344LP Metal, Polished Aluminium
230V ac 50Hz
Clip Positioning
IP20
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
Safety Instructions
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts will become hot;
take care when using/handling.
- When fitting is in operation, some parts will become hot; take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Do not overtighten lamp (bulb).
- Do not touch the lamp or lamp holder while in operation, as both become very hot.
- Turn off & unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position (or someone can touch the contacts).
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting. Trailing flex can present a strangulation hazard to
children. We reccomend installing the light with a suitable cord clip, available at good DIY stores.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Bone
china can be cleaned using a soft damp cloth with a mild detergent if necessary. Switch off power to
the fitting before cleaning. Spare parts are available for this product, please see contact details on
the reverse.
1 Clamp ring
2 Clamp handle
3 Stem
BALL
E14
CANDLE
40W
9W
n/a
7W
Hector Small
BALL R50
LAMP GUIDANCE
TYPE**
WATTAGE***
BASE
SHAPE*
INCANDESCENT (R50 only)
CFL
ECO-HALOGEN
LED
* Use low energy CFL or LED candle/ball lamp for a combination of ambient and low level task lighting or R50 lamp if high level task
illumination required.
** Warm white (2700k) low energy lamps recommended.
*** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
FIG.1
FIG.2
Adjusting Shade
- See fig.3. With one hand supporting the shade, gently loosen the clamp handle (3). One quarter-turn, in an
anti-clockwise direction should be sufficient.
- The shade can then be moved into desired position, ensuring the clamp remains attached to the stem, but
without applying excessive force to the washers on the inside of the clamp. Ensure the shade is still supported
whilst adjusting position.
- Secure in place by gently tightening clamp handle,
taking care NOT to overtighten
, as this can damage the
clamp.
- Do not adjust the position of the shade without loosening the clamp first, as this will damage the washers.
- The clip allows for attachment to be made on a range of surfaces, but its recommended that the mounting
surface does not exceed 3.5cm in thickness and clip is positioned on a horizontal surface (eg. shelf), or on top of a
vertical surface (eg. headboard)- seee fig.1.
- Mounting surface can be square or round, but always ensure a secure attachment is made before operating. It is
not advised to position on the bottom of a vertical surface or on a surface thicker than 3.5cm- see fig.2.
MAX 3.5cm
FIG.3
1 2
3
