7
WWW.ORIGINACOUSTICS.COM
THINFIT INSTALLATION MANUAL
4) Connecting the Wires
Insert the wires into the con-
nectors, making sure that the
positive wire is being attached
to the red connection and the
negative wire is being attached
to the black connection. If the
negative and positive wires are
switched, speaker performance
will be drastically impacted.
5) Installing the Speaker
Make sure all the dogs are in
the upright position and facing
to the side, not outwards. In-
sert the speaker into the hole.
Turn the four screws so that the
dogs face outwards and con-
tinue turning until they clamp
down on the ceiling. When you
feel resistance, stop tightening
the screws. Do not over tighten.
Figure 7.1: Connecting the Wires
Figure 7.2: Securing the Dogs
6) Installing the Grille
Fit the grille over the speaker. The grille uses magnets to be held
in place.
