Professional Collection Manual
15
This Standard does not apply to devices that are already covered by requirements
of another Part II Standard.
Requirements for a specific type of equipment could have additional requirements
as defined in Annexes A, B, D, and E.
Sensors used for medical applications for Class A, B, or C facilities (as defined in
CSA Z32) are within the scope of the CAN/CSA-E60691 Series, and are not within the
scope of this Standard.
Combustible gas detectors are evaluated to the requirements of CSA C22.2 No. 152
and carbon monoxide alarming devices for residential applications are evaluated
to the requirements of CAN/CSA-6.19, and are outside the scope of this Standard.
Low level water cut-off is evaluated to the requirements of CSA C22.2 No. 24 and is
outside the scope of this Standard.
Safety light curtains and similar products are outside the scope of this Standard.
In this Standard, “shall” is used to express a requirement, i.e., a provision that the
user is obliged to satisfy in order to comply with the standard; “should” is used to
express a recommendation or that which is advised but not required; and “may”
is used to express an option or that which is permissible within the limits of the
Standard.
Notes accompanying clauses do not include requirements or alternative
requirements; the purpose of a note accompanying a clause is to separate from the
text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be
written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to
define their application.
