10
DBA10EX In-ceiling Subwoofer Manual
Fit the speaker into the bayonet ring, and twist
it clockwise into place. When the arrow on the
speaker lines up with one of the arrows on
the bayonet ring, that means the speaker is
tightly in place. Be sure that the arrows line up,
otherwise there’s a risk that the speaker will fall
out of the ceiling.
8. Installing the Speaker
1. Fit into Ring
2. Twist into Ring
5.55in
140.9mm
11.26in
286mm
Cutout:
10.31in
262mm
11.75in
298.6mm
DBA10
SCALE:1:4
Origin Acoustics
Mission Inn Rotunda
3649 Mission Avenue, 1st Floor
Riverside, CA 92501
844-ORIGIN1 (674-4461)
www.originacoustics.com
O R I G I N®
A C O U S T I C S
Silicone Sealant:
In all applications where moisture is a concern, care should be taken to
completely seal the speaker to the bayonet ring (Inner Border ‘A’) and also seal the bayonet
ring to the installation surface (Outer Border ‘B’). It is strongly recommended that a liberal
bead of marine grade silicone be applied in these two areas. This will improve weather
resistance and also assure that mechanical vibrations, like those common in watercraft,
will not dislodge the loudspeaker.
Outer Border “B”
MARINE GR
ADE SILIC
ONE
Inner Border “A”
