Origin Acoustics DIRECTOR DSUB8F80K Installation Manual Download Page 5

Page: 5 / 18

DSUB8 Installation Manual

What’s Included

The gauge of wire used can have an impact on the performance of your speakers. Use a

multi-stranded wiring designed for amplifier to speaker connections. Which gauge to select

depends on the length of wire to be used on any particular speaker. The longer your run is,

the larger your wire size must be.

Wire Recommendation

Wire Length

Wire Gauge

0 -100’ (0 - 30m)

50 - 150’ (15 - 45m)

Over 100’ (30m)

DSUB8F8K (Kit consists of DSUB8 + PT8FT)

DSUB8 – Dual 8” In-Ceiling Subwoofer, Mounting Screws, Mounting Template,
Installation Manual

PT8FT – 6” bandpass port tube, port flange, hose clamps, BR68 new construc-
tion bracket, BZ68 bayonet ring, port adapter, round grille, Installation Manual

Summary of Contents for DIRECTOR DSUB8F80K



















Search results

Summary of Contents for DIRECTOR DSUB8F80K

Reviews:

Related manuals for DIRECTOR DSUB8F80K

Brands by name

Popular brands

Origin Acoustics DIRECTOR DSUB8F80K, Installation Manual

Search results

Summary of Contents for DIRECTOR DSUB8F80K

Reviews:

Related manuals for DIRECTOR DSUB8F80K

Brands by name

Popular brands