manualshive.com logo in svg

Origin Acoustics Director 5 Series, Installation Manual

Share
Download
Origin Acoustics Director 5 Series Installation Manual Download Page 12

10

Director Collection™ Manual 

Twist Clockwise

to Lock

Push down to open the connector. 

Insert the wires into the connectors, 

making sure that the positive wire is 

being attached to the red connec-

tion and the negative wire is being 

attached to the black connection. If 

the wires are switched, speaker perfor-

mance will be drastically impacted.

5. Connecting the Wire

Speaker

Wire

Connector

6. Installing the Speaker

STEP 1:

Fit the loudspeaker into the bayonet ring. Then twist the speaker about 15 de-

grees clockwise into place. When the loudspeaker is properly seated, the indica-

tors on the ring and the speaker will line up.

*Important* The indicators must line up to ensure the speaker is properly seated.

1. Fit into Ring

2. Twist into Ring

D59 install

SCALE:1:2

Origin Acoustics

6975 S Decatur Blvd

Suite 140

Las Vegas, NV 89118

844-ORIGIN1 (674-4461)

www.originacoustics.com

A  C  O  U  S  T  I  C  S

O R I G I N

®

Summary of Contents for Director 5 Series























Reviews:

No comments

Brands by name

Popular brands

Load more brands