4
DIRECTOR COLLECTION
TM
MANUAL • D80 SERIES
In this mode, one channel is fed into both tweeters to be distributed throughout
the area. This way in a multiple-speaker setup, one speaker can be a dedicated left
speaker and another a dedicated right.
Surround (Dipole)
The D83DT/SUR model can be used for either one channel (surround) or two
channels (stereo). A switch is located on the back of the speaker to select which
mode to use. One of the modes is labeled as “Dipole” for surround and the other
as “Stereo”. In Dipole mode, you can connect the wire to either left or right input.
Dual Tweeters
In this mode, two channels are fed into the speaker: one channel for each tweeter.
This setup is ideal for small rooms such as walk-in closets and bathrooms, as well
as oddly-shaped areas such as hallways. With both left and right channels in one
speaker, only one speaker is needed in smaller rooms. In areas like hallways, both
channels can be evenly distributed throughout the area with multiple speakers.
Stereo
If you are using a dual tweeter speaker in stereo mode (i.e. there are two wires
connected to the speaker: one for the left channel and one for the right), do not
set the switch to surround mode. This could damage the amplifier.
Warning
