FOUNDATION COLLECTION™ USER MANUAL
6
About the DSP3-700
Startup
DSP3-700
Power Amplifier
After the installation of the device is complete you will see the startup page on the
display. If the amplifier is in Standby mode, press and hold the Standby button for
a few seconds to exit the Standby Mode to the main page.
We have simplified set-up by limiting front panel adjustments to that of
loading internal presets and setting channel levels. All other DSP adjustments
require the use of the dedicated software program. To download the dedicated
software program refer to the DSP3-700 section under the electronics tab
at
www.originacoustics.com
DSP3 amplifiers are highly flexible and intelligent digital audio 3 Channels Class D
power amplifiers. The DSP3-700 amplifier delivers up to a total of 2,100W@4Ω or
able to drive 70/100V constant voltage lines. All setup parameters for input/output
processes and DSP features are accessible by using the remote PC software. Each
DSP3-700 comes preloaded with up to 64 DSP presets to optimize it for use with
all of Origin Acoustics’ speakers and subwoofers assuring peak performance.
