12
y
Unauthorized reproduction or copying of all or part of this manual is prohibited.
y
Oriental Motor shall not be liable whatsoever for any problems relating to
industrial property rights arising from use of any information, circuit, equipment
or device provided or referenced in this manual.
y
Characteristics, specifications and dimensions are subject to change without
notice.
y
While we make every effort to offer accurate information in the manual, we
welcome your input. Should you find unclear descriptions, errors or omissions,
please contact the nearest office.
y
is a registered trademark or trademark of Oriental Motor Co., Ltd.,
in Japan and other countries.
© Copyright ORIENTAL MOTOR CO., LTD. 2013
Published in February 2018
Technical Support Tel:(800)468-3982
8:30
A.M.
to 5:00
P.M.
, P.S.T. (M-F)
7:30
A.M.
to 5:00
P.M.
, C.S.T. (M-F)
www.orientalmotor.com
Schiessstraße 44, 40549 Düsseldorf, Germany
Technical Support Tel:00 800/22 55 66 22
www.orientalmotor.de
Tel:01256-347090
www.oriental-motor.co.uk
Tel:01 47 86 97 50
www.orientalmotor.fr
Tel:02-93906346
www.orientalmotor.it
Tel:+55-11-3266-6018
www.orientalmotor.com.br
• Please contact your nearest Oriental Motor office for further information.
4-8-1Higashiueno,Taito-ku,Tokyo 110-8536
Japan
Tel:03-6744-0361
www.orientalmotor.co.jp
Tel:0800-060708
www.orientalmotor.com.tw
Singapore
Tel:1800-8420280
www.orientalmotor.com.sg
Tel:1800-806161
www.orientalmotor.com.my
Korea
Tel:080-777-2042
www.inaom.co.kr
Tel:1800-888-881
www.orientalmotor.co.th
Tel:400-820-6516
www.orientalmotor.com.cn
Tel:+91-80-41125586
www.orientalmotor.co.in
Hong Kong Branch
Tel:+852-2427-9800
Number of
LED blinks
Alarm type
Cause and remedial action
9
EEPROM error
[Cause]
The stored data in the driver was damaged.
[Remedial action]
Contact your nearest Oriental Motor sales
office.
Lit
CPU error
[Cause]
CPU malfunctioned.
[Remedial action]
Cycle the power.
z
Alarm reset
When the power is cycled, the alarm will be reset. Before resetting an alarm,
always remove the cause of the alarm and ensure safety.
Accessories
Connection cable set
For the connection cable set, a set of three cables for the power supply,
motor, and input/output signals is provided.
Model
Applicable driver
Length [m (ft.)]
Conductor
LCS01CVK2
CVD205-K
CVD215-K
CVD223-K
CVD228-K
0.6 (2)
AWG22 (0.3 mm
2
)
LCS04SD5
CVD512-K
CVD518-K
CVD524-K
Connection cable (for signal)
This is a shielded twisted pair cable for the driver control I/O signals (12 pins)
that has good noise immunity. The ground wires useful to grounding are
provided at both ends of the cable.
Model
Length [m (ft.)]
Conductor
CC12D005-2
0.5 (1.6)
AWG24 (0.2 mm
2
)
CC12D010-2
1 (3.3)
CC12D015-2
1.5 (4.9)
CC12D020-2
2 (6.6)
Pulse signal converter for noise immunity
This product eliminates the noise of the pulse signal, and converts the pulse
signal to the line driver type.
Model:
VCS06
CR circuit for surge suppression
This product is effective to suppress the surge which occurs in a relay contact
part. Use it to protect the contacts of the relay or switch.
Model:
EPCR1201-2
CR circuit module
This product is effective to suppress the surge which occurs in a relay contact
part. Use this product to protect the contacts of the relay or switch.
4 pieces of CR circuit for surge suppression are mounted on the compact
circuit, and this product can be installed to the DIN rail. This product can
make the wiring easily and securely since it also supports terminal block
connection.
Model:
VCS02
