7
Regulations and standards
UL Standards and CSA Standards
This product is recognized by UL under the UL and CSA standards.
The motor model name represents the model that conforms to the standards.
Applicable Standards Certification Body Standards File No.
UL 1004-1
CSA C22.2 No.100
UL
E335369
∗
Thermal class UL/CSA Standards: 105(A)
CE Marking
This product is affixed the CE Marking under the Low Voltage Directive.
The motor model names are the models conform to the directive (CE Marking).
z
Low Voltage Directive
•
This product is designed and manufactured to be incorporated in equipment.
•
This product cannot be used in IT power distribution systems.
•
Install the product inside an enclosure in order to avoid contact with hands.
•
Ground the protective earth terminals for the motor (or connection cable)
and driver securely.
•
Isolate the connection cable, power supply cable and other drive cables from
the signal cables by means of double insulation.
Applicable standards
EN 60034-1, EN 60034-5, EN 60664-1
Installation conditions (EN Standard)
•
To be incorporated in equipment.
•
Overvoltage category:
ІІ
•
Pollution degree: 3
•
Protection against electric shock: Class
І
equipment
∗
Thermal class EN Standards: 120 (E)
z
Motor temperature rise tests
The temperature rise tests stipulated in the above standards are conducted in a
state where a motor is mounted on a heat radiation plate instead of attaching
a gearhead. The size, thickness and material of the heat radiation plates are as
follows.
Motor model
Size [mm (in.)]
Thickness
[mm (in.)]
Material
BLM5120
165×165
(6.50×6.50)
5 (0.20)
Aluminum alloy
BLM5200
BLM6200S
200×200
(7.87×7.87)
RoHS Directive
The products do not contain the substances exceeding the restriction values of
RoHS Directive (2011/65/EU).