Inspection and maintenance
2 Har
33
6
Inspection and maintenance
6-1
Inspection
It is recommended that periodic inspections are conducted for the items listed below after each operation of the
motor. If any failure is found, discontinue any use and contact your nearest office.
Inspection item
•
Check if the openings in the driver are clogged.
•
Check if the installation place of the driver is loose.
•
Check if any of the connection parts of the driver is loose.
•
Check if dust is deposited on the driver.
•
Check if the driver has unusual smells or appearance defects.
The driver uses semiconductor components. Static electricity may damage the semiconductor
components of the driver, so be extremely careful when handling them.
6-2
Warranty
Check on the Oriental Motor Website for the product warranty.
6-3
Disposal
Dispose the product correctly in accordance with laws and regulations, or instructions of local governments.
Summary of Contents for A Step AZ Series
Page 14: ...1 Introduction 14 ...
Page 64: ...3 Implicit communication 64 ...