BTP-R580 USER MANUAL
- 26 -
www.orient-technologies.com. press button “Contact”). However,
the majority of the parameters can also be set by using the special
key-stroke procedures of the printer. These procedures are simple,
do not involve a laptop but only the FEED button on the key-pad of
the printer. The parameters that can be set by pressing the Feed
button include:
For the serial interface only: setting of baud rate, parity,
data bits, stop bits, handshaking, buffer size and data
receive error.
For all interfaces:
setting of mechanism (mark sensor, cutter, buzzer,
power adapter)
print setting (darkness, paper roll width, left margin,
right margin, CR command, code page)
Paper sensor setting (paper low alarm, paper end
stop)
Set default configuration
To start the key-stroke procedure start the self-test procedure as
described in chapter 4.8 steps 1 through 3. After the printer has
stopped printing the configuration sheet, press and hold the FEED
button until the printer starts printing. The printer will print first the
Main Menu of the key-stroke procedure.
A more detailed overview of all parameters can be found in
Appendix A of this manual.