4
Connect one end of the CLB-75160 cable to the chopper head and secure it using the screws
included with the cable.
Install the chopper head in the desired location. The chopper head may be rotated in whichever
direction is most convenient for connecting the cable to the chopper controller.
Insert one end CBL-75160NF cable to the back of the chopper controller at the connector
labeled “MOTOR”.
Verify the electrical mains meets the requirements noted on the back of the chopper controller.
Insert the power cable into the back of the controller and then connect it to the electrical mains.
Power up the controller by depressing the Power switch on the front of the unit, and then adjust
the operating parameters as desired.
