17
Roger Beep
Roger beep emits a tone when you release the
PTT
switch.
1. Press
and hold
the
MENU
button for 2 seconds, the display will
show
Light
2. Press the
MENU
button again
two times
, the display will show
rogEr
3. Rotate the
CH
control to select between roger beep ON or roger beep
OFF. When roger beep is ON, the note icon appears in the display.
Beep Tone
The Beep Tone emits a tone when you press any of the buttons on the
microphone (except the PTT switch).
1. Press
and hold
the
MENU
button for 2 seconds, the display will
show
Light
2. Press the
MENU
button again
three times
, the display will show
bEEP
3. Rotate the
CH
control to select between beep tone ON or beep tone
OFF. When roger beep is ON, the note icon appears in the display.
Call Tone
You can select from 5 call tones the tone that is emitted when the
Call
button is pressed.
1. Press
and hold
the
MENU
button for 2 seconds, the display will
show
Light
2. Press the
MENU
button again
four times
, the display will show
CALL-1
3. Rotate the
CH
control to select between the 5 call tones.
Operation
UHF088-UG.indd 17
2012-2-8 15:44:46