![background image](http://html.mh-extra.com/html/oricom/tp9/tp9_manual_1650735005.webp)
4
4
Basic settings
1.
After installing the batteries, the display should flash the word
“ENGLISH”. If not press and hold for approximately 4 seconds.
2.
Select the desired language using / . Press Del button.
3.
Select the desired contrast setting (2=Default) using / . Press
Del button.
4.
Set the hour (00-23) using / . Press Del button.
5.
Set the minute using / . Press Del button.
6.
Set the day using / . Press Del button.
7.
Set the month using / . Press Del button.
If you wish to change the language, contrast, time settings at a later
date, press and hold button for approximately 4 seconds and repeat
steps 2-8 above.
4.1 Select country version
1.
For New Zealand Select Recall = 600 on the switch on the right-
hand side of the handset or for Australia Select Recall = 100
2.
Lift and replace the handset to initialize.
NOTE: If the switch is in the incorrect position Caller ID and the recall
function will not operate correctly.
5
Operation
When the telephone is not in use, the date and time, number of new and
total number of calls stored in the Caller ID memory will be shown in the
display. The display will show the caller number (and name if available).
5.1
Making a call
1.
Lift the handset and wait for the dial tone.
2.
Use the keypad to enter the desired telephone number. The number
will be shown on the display on the back of the handset.
3.
To end the call, replace the handset or press the hook switch to
make another call.
5.2 Receiving incoming calls
1.
If you receive an incoming call, the phone will ring and the red Calls
light will flash.
2.
To take the call, simply lift the handset.