4.2
Setting the alarm
To turn on the alarm, press the
ALARM SET
button. The icon and the current
alarm time will be flashing and the time of alarm will be shown. After 5 seconds
elapse, the icon comes on to indicate that the clock alarm is on.
To turn off the alarm, press the ALARM SET button again. The icon will be off.
4.3
Using the Snooze button
When the clock alarm sounds, you can use the
SNOOZE
button to temporarily
turn off alarm. The alarm will come on again after 10 minutes. To turn off the
alarm, press any other buttons on the base unit.
Note: In case of AC power failure, the LCD backlight will beturned off to conserve
power. Press the
SNOOZE
button to luminate the clock display.
4.4
Using the radio
Use the
RADIO ON/OFF
, the
radio LED
comes on to indicate the radio is on.
To turn off the radio, press the
RADIO ON/OFF
button again. The
radio LED
tuns off to indicate the radio is off.
Use the
Radio Volume Switch
located at the right side of the unit for adjusting
the radio volume.
Your TCR10 has both FM and AM radio reception. Press the
RADIO FM/AM
button to select FM or AM radio stations.
To select the radio channel frequency, use the
UP/HOUR
button to increase the
radio frequency or you use the
DOWN/MIN
button to decrease the radio
frequency. If you press and hold the button for 1 second, the unit will start auto
frequency search. The frequency will search for the next available good radio
station.
Note:
The Radio alarm will play the last selected radio station and the radio
alarm level will be the last volume setting.
7