only
20
21
Make internal call
1
Press and scroll or then press , or enter
the handset number directly you want to call.
2
The called handset rings and can press to answer
the call.
3
Press to end the call.
Transfer an external call
1
During a call, press .
2
Scroll or then press , or enter the handset
number directly you want to call.
3
The called handset can press to answer. The calling
handset can press to transfer the call.
3-Way conference call
While one handset is on an external call, a second internal
handset can join in and have a 3-way conference call.
1
During an external call, press .
2
Scroll or then press , or enter the handset
number directly you want to call.
3
The called handset can press to answer. The calling
handset can press to start the conference call.
4
Either internal handset can press at any time to leave
the conference call.
How does the ‘Touch Activated Keypad’ work?
The touch activated keypad will automatically disable when
you hold the handset receiver to your ear. The idea being, to
reduce the risk of accidental keypad presses while the phone
is held against the side of your face. Likewise, the keypad
also disables automatically 5 seconds after the last key press.
To ‘wake’ the keypad to enable you to dial further digits, e.g.
if you want to access the menu, you should touch any of the
number keys, wait for the backlight to come on and then you
can dial normally. It is very easy to tell when the keypad is
disabled, as the keypad backlight will not be on.
Troubleshooting
If you are experiencing problems with your Oricom Touch
Phone, firstly check that:
•
the telephone line cord is correctly connected.
•
the mains power cord is correctly connected and the
power switched on.
•
the batteries are charged, polarities are correct and that
the batteries are not in need of replacing.
If you have more than one handset registered to your base
remember to check the connections on this too. If you are
still experiencing a problem, you are likely to find a solution
in the following:
Cannot make a call
•
Is the symbol missing? - move closer to the base.
•
Is symbol displayed? if so unlock the keypad, see
page 6.
•
If you have multi-handsets, another handset may already
be on a call.
Ext
in use will be shown on display.
Interference on the Touch when on a call
•
If you have Broadband installed you MUST install high
quality line filters (not supplied) on all phone sockets. This
is not a problem with your Touch phone.
Handset does not ring/ring is low
•
Check the ringer volume level, see page 5.
Handset is not charging properly
•
Check that the handset is sitting correctly in the base or
charger. Clean the charging contacts with a dry cloth.
Buzzing noise on my radio, TV, computer or hearing aid
•
Sometimes your phone may interfere with other electrical
equipment if it is placed too close. We recommend you
leave a distance of at least one metre to avoid this.
SIMPLE SOLUTIONS
Summary of Contents for TA2000 Series
Page 2: ......
