Oricom secure 910, User Manual

Page: 18 / 24

17
TROUBLESHOOTING
pARENT UNIT MENUS
Should you experience difficulties operating the SC910 please refer to the
troubleshooting guide below. If you still experience difficulties please contact
Oricom Support on 1300 889 785 for assistance.
Issue Troubleshooting
Equipment does not
function
.Check both parent unit and baby unit are turned on.
. Check parent unit is connected to power or rechargeable battery is charged
(not supplied).
.Check baby unit is connected to power.
“Out of Range” display-
ing on parent unit .Move the parent unit closer to the baby unit.
.Register the baby unit to the parent unit.
Reception interfer-
ence
.Move the parent unit closer to the baby unit.
.Reposition the baby unit slightly.
. Check for interference from other electronic devices such as Wi-Fi or micro-
waves.
High pitched or howl-
ing noise from parent
unit–feedback
. Increase the distance between the parent unit and baby unit.
.Reduce the volume on the parent unit.
Picture but no sound .Increase the volume on the parent unit.
Picture is in black
and white
.Night function is active. Increase the light level in the baby’s room if required.
Parent unit emitting
chimes
.Move the parent unit closer to the baby unit until they are within the range.
No picture on unit
. VOX function is activated. Turn off VOX in the menu settings if required.
. Baby unit may be out of range. Move the parent unit closer to the baby unit.
Picture on parent
unit only displayed in
quarter of screen
. Split screen function is on. Select the camera you would like to view in full
screen via the menu settings.
Parent unit emitting
horn alert
. Motion detection alert is active. Turn off or adjust the sensitivity in the menu
settings.
. Temperature alert is active; room temperature is above or below set param-
eters. Adjust the room temperature, or the alert parameters in the menu set-
tings.
Parent unit emitting
double beep . Rechargeable battery (not supplied) power level is low. Connect the power
adaptor to the parent unit.
R e d p o w e r l i g h t
flashing on parent
unit
. Rechargeable battery (not supplied) power level is low. Connect the power
adaptor to the parent unit.
Optional battery not
charging
. Check the battery is connected to the battery connection in the battery com-
partment. After a period of time, the battery may need to be replaced due to
everyday usage. Please contact your local battery retailer for replacement
batteries.